Broken Internet Explorer (IE)

So one of your friends, “not you of course”, has managed to nuke Internet Explorer and they are unsure how they did it. You’ve eliminated the possibility of viruses and adware, so this just leaves you and a broken IE. Before you begin to even consider running a repair install of the OS, let’s try to do a repair on IE instead.

THE REPAIR PROCESS

Start > Run> regedit > HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Active Setup > Installed Components > {89820200-ECBD-11cf-8B85-00AA005B4383} > right-click the “IsInstalled value.” > Modify > change the value from 1 to 0

All right, go ahead and close the editor and reinstall IE from this location. /http://www.microsoft.com/windows/ie/default.mspx

IF SOMETHING GOES WRONG

If messing with the registry and something goes horribly wrong, you can use “Last Known Good Configuration (F8 Safe Mode)” or a Restore Point to get back to where you were before, with your settings. Then you can try again, this time taking care to watch the portion of the registry you are changing. Most people who have troubles with this end up changing the wrong registry key.

I hope this will help you

Solved!

Enable Task Manager

Did you having problem with your Task Manager?Always pop-up "Your task manager has been disabled by Administrator"?

Try this!

Start > Run > gpedit.msc > User Configuration > Administrative Templates > System > Ctrl+Alt+Del Options > Remove Task Manager > Put it into DISABLED

SOLVED!

Increase Internet Connection

I finding something about network and I found this. It's useful for us that having slow internet connection. try and see your self the differences. Below is the way how to configure it :

1. Access the Group Policy Editor. This can be done by typing gpedit.msc in the Run box (Start, and then Run). You will now be looking at something like this.
2. Navigate to Computer Configuration/Administrative Templates/Network/QOS Packet Scheduler using the pane on the left side.
3. In the left pane, there should be a Setting with the name Limit reservable bandwidth, right-click this and select properties.
4. Now this might seem a bit weird, as the State will say “Not Configured” but Windows by default will reserve 20%. So the trick is to set it to reserve 0%. You can do this by clicking enabled and then setting the Bandwidth Limit % to 0. It should look like the image below.
5. Hit OK then close the Group Policy Editor.

Creating remote desktop

Remote Desktop is ways that you want to control other pc from other place and computer.This is also are the best and simple ways to stay connect to your pc at home.

To allow remote connections on the computer you want to connect to, follow these steps:
1- On the computer you want to allow a connection, open the system through the Control Panel.
2- Click "Remote Settings". Under "Remote Desktop", select one of the two "Allow Connections" options. Click "Help Me Choose" if you're not sure which one is right for you. You may be prompted for an administrator password or confirmation during this step.
3- Click "Select Users".
4- In the "Remote Desktop Users" dialog box, click "Add" to add your name.
5- In the "Select Users dialog" box, click "Locations", and choose the location you want to search.
6- In the "Enter The Object Names To Select" box, type the name of the user to add. Click OK.
7- In the "System Properties" dialog box, click OK.

To start Remote Desktop on the computer you want to work from, follow these steps:
1- Open "Remote Desktop Connection" (click the Start button, and search for Remote Desktop Connection).
2- In Computer, type the name of the computer to which you will be connecting. You can type the "IP" address of the computer instead of the name if you prefer. If you don't know your computer's name, click the Start button, and then click "Welcome Center". The computer name will be at the top of the window.
3- Click "Connect".

problem with sound card

Hi guy! we meet again..This is the information that I can share with you guy...if you are using sound card on your pc...this is one of the ways to solve your problem...


If it's a sound card, remove the drivers.
Shut down the PC an remove the card.
Power up and verify that Windows does not see any sound card.
Try use your built-in to check whether it could function on built-in
Power down and reinstall the sound card.
Power up and when Windows identifies the new card, specify where the
driver file you downloaded is on your hard disk and then let Windows
install the new drivers from that location on the hard drive

Can't boot in safe mode

Before this I also having this problem when repairing pc's so you need to follow the step below to start safe mode after to configure you pc. It should be solve your problem.

1. Click start
2 .Click run
3. Type msconfig and hit enter
4. Click the radio button for Diagnostic Startup
5. Click apply and close
6. In the dialogue box that appears click restart
7. When windows restarts you will be in safe mode
8. Minimize the window and run your programs
9. When you are done, go back to normal startup.

Hdd low level format

This tools i founded to make low level format. It's easy to use the software.

to download the tool click here try it..